Filters
Close

Power Tool Accessories

View as
Sort by
Display per page

13mm Chuck & Key 1/2x20 UNF

Chuck and key, industrial quality, with fully hardened and ground working components which offers exceptionally high accuracy , gripping power and durability.
Capacity: 13mm
1/2 x 20 UNF

£16.90 excl VAT

175th Anniversary 1/4in Mixed Socket Set, 39 Piece

The Stanley Tools Anniversary Mixed Socket Set has been designed to commemorate Stanley's rich 175-year history.  The set contains a selection of the most popular bits and sockets.  Supplied in a special edition case with the following contents:

7 x Metric Hex Sockets: 6, 7, 8, 10, 11, 12 & 13mm

3 x 25mm Phillips Bits: PH1, PH2 & PH3
3 x 25mm Pozi Bits: PZ1, PZ2 & PZ3
8 x 25mm TORX Bits: T8, T10, T15, T20, T25, T27, T30 & T40
7 x 25mm TORX Security Bits: TX10, TX15, TX20, TX25, TX27, TX30 & TX40
4 x 25mm Slotted Bits: 4, 4.5, 6.5 & 8mm
4 x 25mm Hex Bits: 3, 4, 5 & 6
1 x 25mm Socket Adaptor Bit

1 x Magnetic Bit Holder 60mm
1 x 1/4in Mini Ratchet

£39.43 excl VAT

19PM P.C.L Male Hose Connector

The Bostitch 19PM P.C.L Male Hose Connector is NOT compatible with CEJN320.

Has a 1/4in B.S.P. fitting.

£11.86 excl VAT

2 Part Hinge Jig H/JIG/A

A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames.
It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly.
Used on-site and in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick and simple to set-up as the hinge is used as the pattern.
Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges.
Use with a light-duty router with 1/4 inch collet.
Long reach router cutter required, 12 mm diameter with 70 mm overall length.
Angled position slots to prevent creep.

Hinge sizes possible:
Length min: 2 5/8 in (67 mm).
Length max :5 in (127 mm).
Width min :3/8 in (9.5 mm).
Width max: 1 3/8 in (35 mm).
Door sizes possible:
Height min: 6 ft 5 in (1955 mm).
Height max: 6 ft 10 in (2100 mm).
Thickness min: 5/8 in (16 mm).

£292.16 excl VAT

3/01 x 1/4 TCT Two Flute Cutter 4.0mm x 11mm

C = 11 mm
D = 4.0 mm 5/32

£19.75 excl VAT

3/02 x 1/4 TCT Two Flute Cutter 6.3mm x 19mm

C = 19 mm
D = 6.3 mm 1/4in

£21.62 excl VAT

3/03 x 1/4 TCT Two Flute Cutter 4.5mm x 11mm

C = 4.5 mm
D = 11 mm

£21.04 excl VAT

3/08 x 1/2 TCT Two Flute Cutter 12.7mm x 25mm

T.C.T.
1/2in Shank.
C = 25 mm
D = 12.7 mm 1/2in

£24.68 excl VAT

3/08 x 1/4 TCT Two Flute Cutter 12.7mm x 25mm

C = 25 mm
D = 12.7 mm 1/2in

£24.68 excl VAT