Building Materials

Krytonite Swelling Waterstop is a synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stop water.

Larsen Streetscape FJM is a fast setting flowing jointing grout mortar specifically designed to meet the recommended performance characteristics of BS7533 parts 4, 7 & 12.

Lotrak 100 is an effective separator beneath selected granular materials, and for lining french or narrow trench drains. The main purpose of this geotextile is to prevent the loss of construction aggregates into the underlying soil.

Mapemortar HB R3 is suitable for application with a trowel or gloved hand, both on vertical surfaces and overhead, with or without formwork, up to a 70mm depth per layer.

PRB Accrofix Pate is designed for application on masonry and concrete surfaces with a smooth finish that exhibit low porosity and high absorption.

This sleek, highly durable and precision-manufactured concrete kerb system has been incorporated into highway schemes up and down the UK. British Standard Kerb uses hydraulic pressing in the manufacture of standard natural kerb, channel and edging to provide consistent long-term performance. Manufactured to the dimensions required in BS EN 1340:2003, this product is available with a wide range of ancillary products to allow for seamless integration with a minimum of cuts. Marshalls' commitment to quality means you can be confident that you're installing concrete kerb units that adhere to strict guidelines as well as having great aesthetics.

1.High bending strength 2.Strong nail holding 3.Moisture-proof and easy work 4.Tight construction and high strength 5.No ratten or decay 6.Low formaldehyde emission 7.The productions are suitable for the construction of viaduct and tall frame building 8.If put in boiling water for 48 hours,it still glue sticking and still formed 9.If used abide by illustration strictly,it can be reuse more than 50 times 10.Solve the problem of leaking and rough surface during construction process

20mm all-in ballast is a 50/50 blend of 20mm gravel and sharp sand that can be used for making concrete, sturdy sub-bases and general building use.

Intersig's heavy duty high chairs are manufactured with larger wires for supporting heavier bars and mesh on site and in the precast factory. Their unique design eliminates any danger of puncturing the Damp Proof Membrane on ground floor slabs. Also known as Hystools and Deck Chairs.

A mixer designed for professional and rental users. Built for site durability, these are quality, portable mixers for all small to medium building projects. The number one choice for mixers worldwide.

Drizoro Maxseal Flex is made up of two components, the first is a water based acrylic resin and the second is a mortar made up of special cements additives and high grade aggregates.

Large lateral cut-outs allows for free flow of concrete.

Larsen Streetscape FJM is a fast setting flowing jointing grout mortar specifically designed to meet the recommended performance characteristics of BS7533 parts 4, 7 & 12.

NATCEM 35, an eco-friendly mortar with swift setting and rapid strength development, is suitable for installation at any thickness, beginning at a minimum of 10mm.

The G951 Peep Weep provides an unobtrusive solution to cavity wall drainage requirements. The weep features a mortar key to ensure adhesion to the building fabric and an external rib to aid positioning. The rib surrounds a 62mm high opening to prevent mortar blockage from within the cavity. The weep’s protective hood which when fitted “peeps” out from the brick fascia is designed to guard against blockage during installation and stops penetration of wind driven rain. The exit hole is ample for water drainage but small enough to prevent entry of large insects.

Classic Tal is a sub-render designed for both exterior and interior walls in a wide range of housing and commercial structures. It is compatible with substrates like blockwork, cement, or poured concrete.

WisaBlock Rebar Caps – the efficient solution for safeguarding against injuries from exposed steel bars. Lightweight, cost-effective, and compatible with standard timber, these caps streamline application, save time, and enhance safety on construction sites. Choose WisaBlock for a reliable and eco-friendly protective solution.