Filters
Close

Electrician's Tools

View as
Sort by
Display per page

Cable Tongue 3.6m

The Super Rod Cable Tongue is used to pull cables through a partition wall (insulation filled plasterboard wall with vertical braces), you will need a hole where the Tongue will enter the wall and an exit hole.

Simple and easy-to-use. Push the Tongue into the entry hole and the Tongue will slide past any insulation or obstructions in the wall due to its unique smooth, flat shape. Once the Tongue has exposed itself at the exit hole, you will now need to tape your cables onto the rear of the Tongue. You can now pull your cables through making sure that you guide the cables through smoothly eliminating any damaged cables.

Length: 3.6m

£10.92 excl VAT

Cavity Master for Floors and Walls

This Cavity Master Kit comes with:

1 x Cavity Master
1 x Arbor and Drill
5 x Solid Cover Plates

£65.60 excl VAT

Cavity Master Mesh Plates (Pack of 5)

Pack of 5 Mesh Cable Access Plates. For use in conjunction with the Cavity Master to seal holes flush with floor surface.

£14.57 excl VAT

Cavity Master Solid Plates (Pack of 5)

Pack of 5 Solid Cable Access Plates. For use in conjunction with the Cavity Master to seal holes flush with floor surface.

£14.57 excl VAT

Gekko Gripper - Magnetic Cable Puller

The Super Rod Gekko Gripper has been designed to make electricians' jobs easier when routing cables through floor voids.

Simple and easy-to-use, uncoil the string from the spool and place the magnet (with string attached) under the floorboard and then place the larger magnet on top of the floorboard. Place any cable (up to Ø10mm) into the Mini Eye & Ring and secure in place. Use the thumb grip to pull the cable through the floor void with ease.

£28.39 excl VAT

Insulated Electrician Screwdriver 150mm x 5mm

International Insulated Electrician Screwdriver.

Size: 150mm x 5mm.

£6.97 excl VAT

Insulated Electrician Screwdriver 200mm x 5mm

International Insulated Electrician Screwdriver

Size: 200mm x 5mm.

£8.82 excl VAT

Insulated Electrician Screwdriver 75mm x 5mm

International Insulated Electrician Screwdriver.

Size: 75mm x 5mm.

£6.41 excl VAT

Insulated Engineers Screwdriver 100mm x 6.5mm

The ITL Insulated Engineers Screwdrivers with parallel blades with and injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C making it unique in this category.

These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.

Size: 100mm x 6.5mm.

£10.32 excl VAT