The Araldite® Industrial Rapid Epoxy is a quick and very strong two-part adhesive which gives both prompt positioning of parts, up to 4 minutes, with permanent full bond strength in 2 hours.
An excellent general purpose adhesive with an environmentally friendly formulation which should be in every home for a huge variety of repairs or creative projects.
Two big 100ml tubes will give you enough for repeated uses and Araldite® Rapid will provide very good results on metal, wood, masonry, ceramics, glass, chipboard, leather, fabric, rubber and most household plastics.
You can use it around the home, garden, workshop or garage as Araldite® Rapid resists a wide range of temperatures from minus 30 degrees Centigrade to plus 80 degrees Centigrade, along with oil and chemicals. It is also water-resistant.
For the very best results, follow the full instructions for use and a step-by-step guide on the reverse of the eco-friendly, recyclable pack.
The Everbuild Co-Axial Gun is used to fit Anchorset co-axial cartridges.
This Forgefix Chemical Anchor Cartridge Gun has a heavy-duty, all-metal construction. It has a quick-release catch on the handle grip, which quickly stems the flow, thus saving resin.
Used with 380ml Resin cartridges for fixing balustrades, handrails, racking and holding down machinery plus many more installation applications.
Body length is 360mm
This Faithfull high quality Foam (Spurt) Gun is designed for use with standard 500/750ml gun grade Polyurethane pressurised expanding foam canisters.
The gun has a sprung trigger mechanism and flow adjuster knob to ensure fine control over the foam output, and to provide a clean, even bead for the accurate installation of the foam which helps to reduce waste. The barrel is hermetically sealed once the trigger has been released to prevent the hardening of the foam when left in the gun.
The Foam Gun has non stick coated needle and canisters fitting valve and a stainless steel barrel to help make cleaning the gun easier. It is supplied complete with two types of additional plastic extension barrels to give better access when used in certain applications.
Ideal for the following applications:
Installation of door and window frames.
Filling and sealing of cavities and joints.
Pipe or cable penetrations in walls.
Sealing joints in wall insulation sheets.
2 x Long plastic extension barrels.
2 x Short plastic narrow access barrels.
The UniBond Epoxy Repair Plastic is a 2-part water-resistant epoxy adhesive that sets solid in 5 minutes. Ideal for strong quick bonding and repairing of most plastics. Can be sanded, drilled and painted. Designed to be workable for 4 minutes while the bond is being created, allowing for the adhesive to be repositioned into the correct position.
It is temperature and water-resistant, meaning it is ideal for internal but also external use, perfect for repairing items such as garden chairs. Will bond plastic to a wide variety of materials including leather, metal, glass, ceramics and most woods.
For best results, lightly sand surfaces prior to bonding. Make sure that surfaces are clean, dry and completely free from dust, dirt, rust, oil, grease, polish and moisture.
Araldite® Steel Epoxy is a strong, long-lasting solvent-free adhesive which is water-resistant and can be painted or sanded. Perfect for jobs on metal like plumbing, car bodywork, gates and windows.
With an environmentally sound product formulation it is recommended for use on most types of metal including steel, galvanised steel, cast-iron, copper and brass and it will set quickly in around 5 minutes achieving full strength in just 4 hours.
2-component epoxy with fast setting, handling time of 1 hour. Will not rust. Metallic grey colour. Fills gaps for uneven breaks. Parts repositionable for 4 minutes, with permanent full bond strength in 4 hours. High temperature resistance (-30°C to 100°C). Oil, chemical and impact resistant.
A steel reinforced metal epoxy putty, suitable for use with metals and most other types of materials. It sets hard in 10 minutes and can be used underwater. It can be drilled, tapped, filed, machined, sanded and painted once it is dry.
The Araldite® Instant Epoxy is a strong, long-lasting solvent-free adhesive which is water-resistant and can be painted or sanded. Supplied in a syringe and sets in 90 seconds. It will be equally effective on metal, wood, ceramics and glass, dry concrete, cardboard, leather and most plastics.
Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®, expanded polystyrene). The 2-component epoxy adhesive is very fast setting. Sets clear. Oil, chemical and impact resistant. High temperature resistance (-30°C to 70°C).