Masonry Anchors

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors.

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors.

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors.

This stress free, non-expansion through fixing is the new solution for heavy duty anchoring into concrete, brick, stone, wood and concrete block replacing the need for traditional anchors such as throughbolts, shield, sleeve and drop-in anchors.

A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. NOTE: Not recommended for overhead applications such as suspended ceilings.

An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete. This standard version can be inserted below the surface. Also known as wedge anchors.

An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete. This standard version can be inserted below the surface. Also known as wedge anchors.

Internal threaded anchor without collar for hanging from threaded rods in concrete. Due to the lack of a collar, it is easy to lubricate in the wall for temporary attachments. Install only with matching Sympafix impact pin. The drop-in anchor is correctly installed once the flared edge of the drop-in pin touches the collar of the anchor. ETA approved for multiple fastenings in both the tensile and compression zones of concrete. Also provided with fire approval for 120 minutes.

Clamping sleeves with reinforced head made of spring steel, self-aligning in the drill hole by the tapered tip.

Clamping sleeves with reinforced head made of spring steel, self-aligning in the drill hole by the tapered tip.

Eyelet collets for suspending non-structural light fixtures. Made of spring steel, self-aligning in the drill hole due to the tapered tip.