Screws, Nails & Fixings

A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

Galvanized through anchors / clickers for fast, reliable, approved, heavy-duty fixings in cracked and non-cracked concrete. With stainless steel expansion clip so that the part of the anchor where the load capacity is built up is not subject to corrosion. Placement depth marking on each anchor prevents incorrect installation. ETA approved for structural permanent attachments in both the tension and compression zones of concrete.

Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials

Used when constructing drywall track and ceiling track systems to stitch the track together (Max. 3.0mm) without the need to pre-drill a hole. • Fire Classification - A1

34 degrees rough construction wood nails on paper strip. Suitable for all 34 degree battery, pneumatic or gas operated nail guns, including the Sympafix W90 and W100, Paslode® IM350 and Hilti® GX90-WF.

The most popular hose clamps in the Jubilee® Clips range, these mild steel zinc protected worm drive hose clips are ideally suited for most day to day requirements for joining hose.

Adheres to all surface types, even if wet. Remains flexible with age, can be painted. A water repellent, general purpose sealant, based on SBR rubber. It has excellent adhesion to all surfaces, even when damp. Bond It 'Rain-Mate' is a permanently flexible, water repellent and UV resistant, paintable sealant that will not crack or slump. It is suitable for use on brick, concrete, stone, all metals, painted or bare wood, glass, vinyl and most plastics. It is also compatible with bitumen and asphalt for roof repairs in damp conditions.

An internally threaded hammer set expansion anchor for heavy duty anchoring into concrete. This standard version can be inserted below the surface. Also known as wedge anchors.

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness.

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.

Hardened nail specifically designed for fixing to masonry and concrete blocks.

The Heavy Duty Bungee Lanyard utilises advanced components to deliver unrivalled performance for heavy tools in the most severe environments.

A light weight nail, commonly used for cabinet making and light duty applications.

A large diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out.

Prosolve Gaffe Tape is a high quality polyethylene coated waterproof cloth tape with a pressure sensitive adhesive with can be used for a binding, sealing, masking and protecting a multitude of products.

A versatile heavy duty coach screw with a hex flange head and is the modern replacement for traditional DIN 571 coach screws. Benefits from an aggressive slash point tip for easy driving and reduced splitting. Suitable for softwood, hardwood, man-made board or masonry with the use of a nylon plug. Zinc plated and yellow passivated for improved corrosion resistance.

Pressed steel frame and handle with plunger and release clip. For the application of sealants and adhesives. Max capacity 300ml.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

Galvanized through anchors / clickers for fast, reliable, approved, heavy-duty fixings in cracked and non-cracked concrete. With stainless steel expansion clip so that the part of the anchor where the load capacity is built up is not subject to corrosion. Placement depth marking on each anchor prevents incorrect installation. ETA approved for structural permanent attachments in both the tension and compression zones of concrete.