Screws

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included. • Plated in Trivalent Chromium (Cr3) Zinc • Manufactured from grade 8.8 carbon steel

M10 Zinc Type P Nylon Nuts provide secure, vibration-resistant fastening for a wide range of applications. Designed to prevent loosening, they are ideal for reliable bolting where movement or vibration is present.

M16 Zinc Type P Nylon Nuts provide secure, vibration-resistant fastening for demanding bolting applications. Designed to resist loosening, they ensure long-lasting and reliable performance.

M8 Zinc Type P Nylon Nuts provide secure, vibration-resistant fastening for a wide range of bolting applications. Designed to prevent loosening, they ensure dependable performance.

Tension-free, structural screw anchor suitable for heavy loads and small centre-to-centre distances and edge distances. For concrete, sand-lime brick and masonry. ETA approved for structural permanent attachments in both the tension and compression zones of concrete. Integrated pressed-on flange with locking profile under the head. Dimensions listed on top of anchor for possible inspection. Beautiful finish on visible work.

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin.

The M10 x 75 Zinc Throughbolts provide strong, torque-controlled anchoring for concrete applications. Designed for quick installation, they include a hex nut and washer for a secure, reliable hold.

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness.

Grade 8.8 steel bolt with a hex head for use with spanners or sockets. Part-threaded design ideal for high-strength fastening. Bright Zinc Plated for corrosion resistance and conforms to DIN 931.

Hex head self-drilling screws, for joining roofing sheets to light section steel (Max. 5.0mm) without the need to pre-drill a hole. • Fire Classification - A1

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.

The TB1-PLUS 8/75x130 Galvanized Through-Bolt Anchors deliver heavy-duty, ETA-approved performance in cracked and uncracked concrete. Designed for strength, speed, and reliability in structural fixings.

The C2 Strong-Fix Trade Case (1,798pcs) delivers high-performance PZ double countersunk screws with exceptional holding strength and fast insertion. Supplied in a durable organiser case with popular sizes and impact driver bits for professional use.

Used when constructing drywall track and ceiling track systems to stitch the track together (Max. 3.0mm) without the need to pre-drill a hole. • Fire Classification - A1

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness.

High tensile part-threaded bolt ideal for structural and mechanical fastening. Made from Grade 8.8 steel with a corrosion-resistant Bright Zinc Plate (BZP) finish. Hex head suits standard spanners and sockets.

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.

Advanced Coach Screws Hex Flange Yellow 10.0 x 100 offer fast, heavy-duty fixing with superior holding power. Designed for timber and masonry (with plug), they install up to 3× faster than standard coach screws.

The TB1-PLUS 12/50x135 Galvanized Through-Bolt Anchors provide certified heavy-duty performance for cracked and uncracked concrete. With ETA Option 1 and seismic approval, they deliver secure, reliable, and corrosion-resistant structural fixings.

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.