T.I.Midwood & Co Ltd

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

General use with full round head for clamping. • For medium duty rust protection • Conforms to Eurocode 5 and service class 2

Ideal for securing the bottom of gates and doors in domestic and industrial applications. Extended bolt length for ease of operation and an adjustable bolt throw by moving the keep position. Fixings included.

Ideal for securing the bottom of gates and doors in domestic and industrial applications. Extended bolt length for ease of operation and an adjustable bolt throw by moving the keep position. Fixings included.

Gate springs provide automatic closure for single action gates. The spring tension is adjustable for increasing or decreasing the gate closing force. Fixings included.

Gate springs provide automatic closure for single action gates. The spring tension is adjustable for increasing or decreasing the gate closing force. Fixings included.

Hex head self-drilling screws, for joining roofing sheets to light section steel (Max. 5.0mm) without the need to pre-drill a hole. • Fire Classification - A1

M6 Zinc Hex Full Nuts provide reliable fastening for a wide range of general bolting applications. Zinc plated in Cr3, they offer corrosion resistance for dependable internal use.

M16 x 30 Zinc Set Screws grade 8.8 deliver high tensile strength for demanding fastening applications. Fully threaded and Cr3 zinc plated for reliable internal use.

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included. • Plated in Trivalent Chromium (Cr3) Zinc • Manufactured from grade 8.8 carbon steel

A keyless hand-tightened three jaw chuck that fits drills with 1/2" shaft. Ideal for impact drills up to 750 watt. Sold with an SDS plus adaptor. Suitable for 1.5mm - 13mm drill bits.

The SDS Plus Drill Bit with hard metal coating is designed for use with AEG, Dewalt, Makita, Metabo, Hitachi, Bosch, Hilti, and Milwaukee tools. It offers an exceptionally long service life, making it a reliable choice for demanding tasks. This set includes drill bits in sizes 5/6/8/10/12 x 160 mm.

Holesaw arbors including pilot drill for use with 14 - 30mm diameter holesaws.

The cranked pattern hook and band hinges are for hanging the door or gate flush with the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and agricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to pre

The cranked pattern hook and band hinges are for hanging the door or gate flush with the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and agricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to pre