Weldability

To EN166. These lenses are used to protect the filter from weld splatter and sparks.

Available to suit Oxygen, Argon, etc.. (RH) or Acetylene, Propane, etc.. (LH). Range includes 3/8 BSP (HD) & 1/4 BSP (LW) thread sizes.

Available to suit Oxygen, Argon, etc.. (RH) or Acetylene, Propane, etc.. (LH). Range includes 3/8 BSP (HD) & 1/4 BSP (LW) thread sizes.

Use with suitable hose clips to join 2 lengths of hose together without using threaded nuts and couplers. Splicers are available to suit a range of hose sizes.

Inserted into hose, to attach hose nuts. • Available for a variety of hose bore sizes • Use with hose nuts and suitable hose clips to secure in place and seal.

To EN166. Protect filters from spatter.

Strong, black, drop-forged spanners with integrated cylinder key, 3/8" BSP or EU 19mm jaw for common hose nuts and 5/8" BSP jaw for common regulator nuts.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

Popular DIN type design with a locking brass male connector and insulating rubber wall. • Full range to suit many cable sizes.

Popular “DIN” type design with a brass female connector and insulating rubber wall. A full range to suit many different cable sizes

Solid, rugged, design. Strong spring jaws. A full range of current sizes is available, and the popular Nevada style.

A vital item of gas safety equipment. This product must be used at the torch end of a hose to help prevent dangerous back-feeding of gases. Fasten inside the hose using hose clips.

A vital item of gas safety equipment. This product must be used at the torch end of a hose to help prevent dangerous back-feeding of gases. Fasten inside the hose using hose clips.

Also called ‘O’ Clips, they are used to crimp over the ends of hoses to secure hose tails and create a gas-tight seal.

Also called ‘O’ Clips, they are used to crimp over the ends of hoses to secure hose tails and create a gas-tight seal.

A threaded connector used with hose nuts and tails to join 2 lengths of hose together.

A threaded connector used with hose nuts and tails to join 2 lengths of hose together.

These single-stage indicator regulators are designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding.